best way to get varnish off wood
If you plan on removing the varnish and then painting the wood, sanding can be an effective way to get rid of the varnish while prepping the wood at the same time. it’s also a natural and chemical-free way to remove varnish. it can however be labour intensive. all you need to do is start with 150-grit sandpaper and sand the entire surface.. If the stained wood has a finish, it's either shellac, lacquer or some kind of varnish. often, the easiest way to remove a thin lacquer or shellac finish is to wipe it off with lacquer thinner for lacquer or denatured alcohol for shellac. you may also be able to sand it off without much trouble.. The mix will serve as your polyurethane stripper--strong enough to remove the finish but unable to penetrate the wood and disturb the stain if quickly removed. step 2 apply the mixture onto the polyurethane finish, covering the stained wood..
best way to get varnish off wood
Start by sanding off the old varnish with 150-grit sandpaper. after you remove as much as you can, move to 220-grit sandpaper until all of the varnish is gone. when you’re done, wipe off any dust with a damp cloth. another way to remove varnish is to use a water-based solvent or a traditional paint-stripping solvent.. How to remove paint and varnish prep. remove all old hardware, including door hinges. to save yourself lots of effort and time, spend about 10 minutes and sand over your entire piece with coarse sand paper. make sure to sand in direction of the wood. what you’re doing is prepping the remover to do an even better job than its advertised..
